All programs will be locked after start. Changing the program or ?nishing the program will be possible only after pressing the start button for longer then 1.5 sec. (Break by customer)
A switching off the appliance or unplug the appliance for a while, this will frozen the program step and later on, the program continuos on the same position.
Exception: Switching off the appliance or unplug the appliance during the drying phase, this will lead directly to the end of the program.
Heating element: Safety thermostat self reset (Temperature of water)
~ 85 °C
Rotations: Spray pump motor
2800 RPM
Heating element:
1 Element system
Electronic boards: Serial boards (Basic UCB, not programmed)
4619 727 06231
see on board itself
Electrical base data: Voltage 220/ 230 V (max.)
230 V
Single electric water inlet valve: Resistance
3.76 k Ω
Data Energy Label: Drying Performance
B
Single electric water inlet valve: Voltage
220/ 240 V
Heating element: Power Consumption
1.87/ 2.04 kW
Regeneration valve: Frequency
50/ 60 Hz
Rotations: Spray arm upper
30 RPM - 40 RPM
Flow rates/ Inlet volume: Pump height max.
1.1 m
Flow rates/ Inlet volume: Spray arm lower
~ 33 l/min
Program information: Main wash
40 cm 3
Spray pump motor permant spray system: HI
69 Ω
Water softener: Resin container
700 cm 3
Heating element: Voltage
220/ 230 V
Flow rates/ Inlet volume: Inlet valve
4 l/min
Water softener: Salt container
2 kg
Electrical base data: Voltage 220/ 230 V (min.)
220 V
Spray pump motor: Capacitor
4 µ F
Drain pump motor: Voltage
220/ 240 V
Spray pump motor: Resistance
Primary winding 69 Ω
Start winding 48 Ω
Detergent capacity: Dosage steps
1 à 6 cm 3
min. 1 ml
max. 6 ml
Succession of programs: Succession P1a-P3a-P5g-P6a-P7a ()
VOIR CHARTE
Coil of dispenser: Frequency
50/ 60 Hz
Dimensions + Weight: Product dimensions (Weight)
56 kg
Flow rates/ Inlet volume: Spray arm upper
~ 27 l/min Sprayarm/ Shower top ~ 8 l/min
Volume: Water Volume Level
Regeneration 0.3 l 15 mm
Back rinse 3x 1.0 l 60 mm
Prewash 4.8 l 120 mm
Main wash 4.2 l 118 mm
Intermediate rinse 1 4.2 l 118 mm
Intermediate rinse 2 4.2 l 118 mm
Clear rinse 4.2 l 118 mm
Safety/ overflow 8.5 l 141 mm
REGENERATION 0,3 l 15 mm
RINÇAGE 1,0 l 68 mm
PRELAVAGE 4,8 l 124 mm
LAVAGE 4,2 l 122 mm
1er RINÇAGE INTERMED 4,2 l 120 mm
2er RINÇAGE INTERMED 4,2 l 120 mm
RINÇAGE FINAL 4,2 l 120 mm
SECURITE/ANTI-DEBORD 8,5 l 141 mm
Heating element: Fuse
206 °C
Regeneration valve: Resistance
3.13 k Ω
Electronic boards: Serial boards ()
Programmed control board and programing of version , see ,,Board Service" and ,,DATA" on rating plate of inner door:
Data Energy Label: Energy Performance
A
Flow rates/ Inlet volume: Flow meter
208 lmp/l
Data Energy Label: Reference program
P5g
Размеры + Вес: Размеры продукта (ширина)
59.7 cm
Drain pump motor: Resistance
146 Ω
Succession of programs: Programs ()
see program diagram
Water softener: Resin container quantity
700 cm 3
Coil of dispenser: Voltage
220/ 240 V
NTC
20 °C 58.1 kΩ
25 °C 47.1 kΩ
30 °C 38.2 kΩ
40 °C 25.4 kΩ
50 °C 17.2 kΩ
60 °C 11.8 kΩ
70 °C 8.3 kΩ
80 °C 6 kΩ
85 °C 4 kΩ
20 °C 58,1 kΩ
25 °C 47,1 kΩ
30 °C 38,2 kΩ
40 °C 25,4 kΩ
50 °C 17,2 kΩ
60 °C 11,8 kΩ
70 °C 8,3 kΩ
80 °C 6 kΩ
85 °C 4 kΩ
Water pressure: Spray pump pressure
0.3 bar
Размеры + Вес: Размеры продукта (Глубина)
59.6 cm
Regeneration valve: Voltage
220/ 240 V
Detergent capacity: Main wash
40 cm 3
Water softener: Regeneration dosage
300 cm 3
Heating element: Resistance
24.5 Ω
Single electric water inlet valve: Frequency
50/ 60 Hz
Spray pump motor: Power Consumption
140 W
Spray pump motor permant spray system: HA
48 Ω
Spray pump motor permant spray system: Power Consumption