Схема узла
Запчасти для посудомоечной машины Whirlpool ADG 758
Выберите версию/индустриальный код: * От выбранной версии зависит совместимость запчастей
851115510810
Характеристики:
Water pressure: Inlet pressure | 0.5 bar - 9 bar |
Rotations: Drain pump motor | 2500 RPM |
Dimensions + Weight: Wooden door (Height) | 650 mm - 720 mm |
Regeneration dosage: Salt container | 1.5 kg |
Coil of dispenser: Voltage 220/ 240 V (max.) | 240 V |
Volume: Clear rinse | 140 ccm |
Heating element: Temperature on surface | ~ 115 °C |
Volume: Water connection up to | 60 °C |
Data Energy Label: Reference program (Bio eco) | 55°C |
Volume: Rinse aid dosage | 140 cm 3 |
Succession of programs: Succession (Bio eco) | 55°C |
Measuring the level: | Remove the coases sieve, put into the sump a meassuring meter, look the height of the water level |
Electronic boards: Service boards () | siehe Ersatzteilliste |
Program information: | End - Acoustic signal All programs will be locked after start. Changing the program or ?nishing the program will be possible only after pressing the start button for longer then 1.5 sec. (Break by customer) A switching off the appliance or unplug the appliance for a while, this will frozen the program step and later on, the program continuos on the same position. Exception: Switching off the appliance or unplug the appliance during the drying phase, this will lead directly to the end of the program. |
Spray pump motor: Voltage 220/ 240 V (max.) | 240 V |
Электрические базовые данные: напряжение | 220 V - 230 V |
Heating element: Safety thermostat self reset (Temperature of water) | ~ 85 °C |
Safety level: | (Floater switches of the inlet valve and on the drain pump) |
Rotations: Spray pump motor | 2850 ± 20RPM |
Heating element: | 1 Element flow through system |
Measuring the level: Working level | 110 mm |
Heating element: Power Consumption | 2.05 kW |
Regeneration dosage: Steps | 5 to set the water softening system |
Spray pump motor: Voltage 220/ 240 V (min.) | 220 V |
Heating element: Voltage | 220/ 230 V |
Measuring the level: Safety level | 125 mm |
Drain pump motor: Voltage 220/ 240 V (max.) | 240 V |
Regeneration valve: Power Consumption | 6 W |
Regeneration dosage: Volume for regeneration | 320 cm 3 320 |
Dimensions + Weight: Wooden door (Max. stick out over lower edge of appliance door) | 90 mm |
Options: | Delay function |
Drain pump motor: Voltage 220/ 240 V (min.) | 220 V |
Electrical base data: Total power | 2.2 kW |
Measuring the level: Safety/ overflow | 125 mm |
Heating element: Double Safety thermostat | 85 °C |
Dimensions + Weight: Wooden door for Full Door appliances (Width) | 442 mm - 448 mm |
Volume: Detergent | 5+25 gr |
Coil of dispenser: Voltage 220/ 240 V (min.) | 220 V |
Thermostat NTC | 23 °C ~ 14 k Ω |
Dimensions + Weight: Product dimensions (Weight) | 43 kg |
Single electric water inlet valve: Voltage 220/ 240 V (min.) | 220 V |
Dimensions + Weight: Wooden door for Full Door appliances (Height of plinth) | min. 93 mm |
Heating element: Fuse | 206 °C |
Dimensions + Weight: Wooden door for Full Door appliances (Max. stick out over lower edge of appliance door) | 90 mm |
Regeneration valve: Resistance | ~ 3.75 k Ω |
Dimensions + Weight: Wooden door for Full Door appliances (Height) | 650 mm - 720 mm |
Размеры + Вес: Размеры продукта (ширина) | 44.8 cm |
Succession of programs: Programs () | see program diagram |
Электрические базовые данные: частота | 50 Hz |
Электрические базовые данные: Потребляемая мощность | 2,2 W |
NTC | 23 °C ~ 14 kΩ |
Single electric water inlet valve: Voltage 220/ 240 V (max.) | 240 V |
Succession of programs: Succession (Delicate) | 45°C |
Электрическая база данных: Предохранитель | 10 A |
Water pressure: Spray pump pressure | ~ 0.3 bar |
Размеры + Вес: Размеры продукта (Глубина) | 57.0 cm |
Regeneration dosage: Number of cycles with 1.5 kg salt | 20 20 |
Volume: Rinse aid dispenser | per step 1 ccm |
Dimensions + Weight: Wooden door (Width) | 445 mm - 450 mm |
Regeneration valve: Voltage | 220 V - 240 V |
Heating element: Thermal fuse | 206 °C |
Dimensions + Weight: Wooden door (Weight) | 2,5 kg - 6,2 kg |
Succession of programs: Succession (Normal) | 65° |
Heating element: Resistance | 24.5 Ω |
Regeneration dosage: Default water hardness | 3 |
Dimensions + Weight: Wooden door for Full Door appliances (Weight) | 2.5 kg - 6.2 kg |
Dimensions + Weight: Wooden door (Thickness) | 16 mm - 25 mm |
Heating element: Heating speed | ~ 2.0 °C/min |
Volume: Capacity | 9 stand. place settings |
Succession of programs: Succession (Intensive) | 65° |
Dimensions + Weight: Wooden door for Full Door appliances (Thickness) | 16 mm - 20 mm |
Regeneration dosage: Position of selector setting German degrees °dH French degrees °fH | Setting N.1 NO SALT 0 - 4 0 - 7 Setting N. 1 5 - 9 8 - 15 Setting N. 2 10 - 17 16 - 30 Setting N. 3 18 - 26 31 - 45 Setting N. 4 27 - 35 46 - 60 Setting N. 5 36 - 47 61 - 80 0 - 4 0 - 7 Position 1 5 - 9 8 - 15 Position 2 10 - 17 16 - 30 Position 3 18 - 26 31 - 45 Position 4 27 - 35 46 - 60 Position 5 36 - 47 61 - 80 |
Размеры + Вес: Размеры продукта (Высота) | 82.0 cm - 87.0 cm |