Схема узла
Запчасти для посудомоечной машины Whirlpool ADG 8977 WH
Характеристики:
Rotations: Drain pump motor | 3000 tr/min |
Detergent capacity: Rinse aid dosage | 135 cm 3 |
Dimensions + Weight: Wooden door (Height) | 515 mm - 600 mm |
Electronic boards: Serial boards (Data set) | 481281 |
Regeneration with automatic salt adaption: after wash cycles | Depending on the water hardness |
Succession of programs: Succession () | A1a - A2a - A3a - A5e - A8a - A9a |
Flow rates/ Inlet volume: Shower/Spray arm top | ~ 8 l/min |
Electronic boards: Serial boards (UCB programmed) | 481291 |
Program information: Prewash | 10 cm 3 |
Spray pump motor: Voltage | 220/ 240 V |
Heating element: Temperature on surface | ~ 115 °C |
Flow rates/ Inlet volume: Fan for drying | Total 900 l/min Primary air flow 210 l/min Secondary air flow 780 l/min |
Drain pump motor: Power Consumption | 30 W |
Coil of dispenser: Resistance | 1,3 k Ω |
Flow rates/ Inlet volume: Spray pump | l/min |
Spray arms, turning rhythm at alternating spray system: Intermediate rinse | Spray arm lower ~2min Spray arm upper ~2min |
Электрические базовые данные: напряжение | 220 V - 230 V |
Rotations: Spray pump motor | 2800 tr/min |
Water Volume: EAU volumes niveau | REGENERATION 0,3 l 15 mm RINÇAGE 1,0 l 68 mm PRELAVAGE 3,9 l 124 mm LAVAGE 3,2 l 122 mm 1er RINÇAGE INTERMED 3,2 l 120 mm 2er RINÇAGE INTERMED 3,2 l 120 mm RINÇAGE FINAL 3,2 l 120 mm SECURITE/ANTI-DEBORD 8,5 l 141 mm |
Motor Diverter Valve: Signal (2x within ~13 sec.) | (2x DANS ~13 sec.) 5.0 V |
Electronic boards: Serial boards (Basic UCB, not programmed) | 4619 724 81061 |
Single electric water inlet valve: Resistance | 3,76 k Ω |
Single electric water inlet valve: Voltage | 220/ 240 V |
Heating element: Power Consumption | 1,87/ 2,04 kW |
Regeneration valve: Frequency | 50/ 60 Hz |
Rotations: Spray arm upper | 30 tr/min - 40 tr/min |
Regeneration with automatic salt adaption: Volume | 300 cm 3 |
Flow rates/ Inlet volume: Pump height max. | 1,1 m |
Flow rates/ Inlet volume: Spray arm lower | ~ 33 l/min |
Program information: Main wash | 40 cm 3 |
Motor Diverter Valve: Voltage | 220 V - 240 V |
Heating element: Voltage | 220/ 230 V |
Flow rates/ Inlet volume: Inlet valve | 4,0 l/min |
Fan for drying: Resistance | 141 Ω |
Water softener: Salt container | 2 kg |
Spray pump motor: Capacitor | 4 µ F |
Dimensions + Weight: Wooden door (Max. stick out over lower edge of appliance door) | 92 mm |
Drain pump motor: Voltage | 220/ 240 V |
Spray pump motor: Resistance | Primary winding 79 Ω Start winding 60 Ω |
Spray arms, turning rhythm at alternating spray system: Final rinse | Spray arm lower ~2min Spray arm upper ~2min |
Detergent capacity: Dosage steps | 1 à 6 cm 3 |
Water pressure: Inlet pressure () | bar |
Heating element: Double Safety thermostat | 85 °C |
Coil of dispenser: Frequency | 50/ 60 Hz |
Dimensions + Weight: Product dimensions (Weight) | 50 kg |
Flow rates/ Inlet volume: Spray arm upper | ~ 27 l/min |
Motor Diverter Valve: Frequency | 50/ 60 Hz |
Regeneration valve: Resistance | 3,13 k Ω |
Regeneration with automatic salt adaption: Water hardness | 0 - 60 0 - 10,7 mmol/l 0 - 107 °TH |
Flow rates/ Inlet volume: Flow meter | 208 Impuls./l |
Data Energy Label: Reference program | A5e A A A |
Размеры + Вес: Размеры продукта (ширина) | 59,7 cm |
Drain pump motor: Resistance | 146 Ω |
Water softener: Resin container quantity | 900 cm 3 |
Электрические базовые данные: частота | 50 Hz |
Электрические базовые данные: Потребляемая мощность | 2,2 kW |
Spray arms, turning rhythm at alternating spray system: Prewash | Spray arm lower ~3 min Spray arm upper ~1 min |
Coil of dispenser: Voltage | 220/ 240 V |
NTC | 20 °C 58,1 kΩ 25 °C 47,1 kΩ 30 °C 38,2 kΩ 40 °C 25,4 kΩ 50 °C 17,2 kΩ 60 °C 11,8 kΩ 70 °C 8,3 kΩ 80 °C 6 kΩ 85 °C 4 kΩ |
Regeneration: Salt consumption for regeneration | 77 g |
Dimensions + Weight: Wooden door (Height of plinth) | 93 mm |
Электрическая база данных: Предохранитель | 10 A |
Fan for drying: Voltage | 220 V - 240 V |
Размеры + Вес: Размеры продукта (Глубина) | 55,5 cm |
Spray arms, turning rhythm at alternating spray system: | EN CAS DE COUPURE DE COURANT OU D`INTERRUPTION DURANT LE PROGRAMME TEST, AU RYTHME DE: 5 min / 3min. IMPORTANT PROGRAMME TEST EN APPUYANT SUR LE BOUTON DEPART PENDANT PLUS DE 1,5 sec. IL EST NECESSAIRE D`ETEINDRE L`APPAREIL A LA FIN DU PROGRAMME TEST PROGRAMME DE LAVAGE SERA EFFECTUE AVEC PROGRAMME TEST SOIT : ~30 sec./ ~30 sec. |
Dimensions + Weight: Wooden door (Width) | 592 mm - 595 mm |
Spray arms, turning rhythm at alternating spray system: Service Test program | Spray arm lower ~30 sec Spray arm upper ~30 sec |
Regeneration valve: Voltage | 220/ 240 V |
Rotations: Fan for drying | tr/min. |
Dimensions + Weight: Wooden door (Weight) | max. 5,5 kg |
Spray arms, turning rhythm at alternating spray system: Main wash | Spray arm lower ~3 min Spray arm upper ~5 min |
Water softener: Regeneration dosage | 300 cm 3 |
Heating element: Resistance | 24,5 Ω |
Single electric water inlet valve: Frequency | 50/ 60 Hz |
Dimensions + Weight: Wooden door (Thickness) | 16 mm - 20 mm |
Spray pump motor: Power Consumption | 125 W |
Heating element: Heating speed | °C/min |
Rotations: Spray arm lower | 30 tr/min - 40 tr/min |
Electronic boards: Serial boards (DUB) | 4619 724 81271 |
Flow rates/ Inlet volume: Drain pump | 16 l/min |
Размеры + Вес: Размеры продукта (Высота) | 82,0 cm - 87,0 cm |
Motor Diverter Valve: Resistance | 6,5 k Ω |
Regeneration: Number of cycles with 2 kg salt | 26 |