Схема узла
Запчасти для посудомоечной машины Whirlpool ADG 8983/1 NB
Выберите версию/индустриальный код: * От выбранной версии зависит совместимость запчастей
854298329771
Характеристики:
Rotations: Drain pump motor | 3000 tr/min |
Detergent capacity: Rinse aid dosage | 135 cm 3 |
Dimensions + Weight: Wooden door (Height) | 515 mm - 600 mm |
Electronic boards: Serial boards (Data set) | 747727 |
Flow rates/ Inlet volume: Shower/Spray arm top | ~ 8 l/min |
Electronic boards: Serial boards (UCB programmed) | 747737 |
Succession of programs and duration: Delicate | 40°C |
Spray pump motor: Voltage | 220/ 240 V |
Heating element: Temperature on surface | ~ 115 °C |
Detergent capacity: Prewash | 10 cm 3 |
Drain pump motor: Power Consumption | 30 W |
Coil of dispenser: Resistance | 1,3 Ω |
Flow rates/ Inlet volume: Spray pump | 45 - 64 l/min |
Program information: | REMARQUE - TOUS LES PROGRAMMES SERONT VERROUILLES APRES LE DEPART - IL EST POSSIBLE DE MODIFIER OU DE TERMINER LE PROGRAMME EN APPUYANT SUR LE BOUTON DEPART PENDANT PLUS DE 1,5 sec. ET PERMET AU PROGRAMME, DES LA REMISE EN FONCTIONNEMENT, DE REPRENDRE SUR LA MEME POSITION OU IL SE TROUVAIT AU - EXCEPTION PHASE DE SECHAGE ENTRAINE DIRECTEMENT LA FIN DU PROGRAMME. |
Электрические базовые данные: напряжение | 220/ 240 V |
Heating element: Safety thermostat self reset (Temperature of water) | °C |
Rotations: Spray pump motor | 2800 tr/min |
Water Volume: EAU volumes niveau | REGENERATION 0,3 l 15 mm RINÇAGE 1,0 l 68 mm PRELAVAGE 3,9 l 124 mm LAVAGE 3,2 l 122 mm 1er RINÇAGE INTERMED 3,2 l 120 mm 2er RINÇAGE INTERMED 3,2 l 120 mm RINÇAGE FINAL 3,2 l 120 mm SECURITE/ANTI-DEBORD 8,5 l 141 mm |
Motor Diverter Valve: Signal (2x within ~13 sec.) | (2x DANS ~13 sec.) 5.0 V |
Heating element: | 1 Element system |
Electronic boards: Serial boards (Basic UCB, not programmed) | 4619 727 47651 |
Single electric water inlet valve: Resistance | 3,76 k Ω |
Single electric water inlet valve: Voltage | 220/ 240 V |
Heating element: Power Consumption | 1,87/ 2,04 kW |
Regeneration valve: Frequency | 50/ 60 Hz |
Water hardness: Classe de dureté d`eau Degrés français°fH mmol/l Nombre de clignotements suivant la dureté ou sur afficheur à cristaux liquides | 1 doux 0 - 9 0 - 0.9 1 x 1 - 2 doux/ moyen 10 - 18 1 - 1.8 2 x 2 moyen 19 - 27 1.9 - 2.7 3 x 3 moyen/ dur 28 - 37 2.8 - 3.7 4 x (départ usine) 4 dur 38 - 50 3.8 - 5.0 5 x 4 très dur 51 - 63 5.1 - 6.3 6 x 4 extrêmement dur 64 - 107 6.4 - 10.7 7 x |
Rotations: Spray arm upper | 30 tr/min - 40 tr/min |
Flow rates/ Inlet volume: Pump height max. | 1,1 m |
Flow rates/ Inlet volume: Spray arm lower | ~ 33 l/min |
Motor Diverter Valve: Voltage | 220 V - 240 V |
Electronic boards: Serial boards (UB) | 4619 724 86782 |
Heating element: Voltage | 220/ 230 V |
Flow rates/ Inlet volume: Inlet valve | 4,0 l/min |
Water softener: Salt container | 2 kg |
Spray pump motor: Capacitor | 4 µ F |
Dimensions + Weight: Wooden door (Max. stick out over lower edge of appliance door) | 92 mm |
Options: | 1/2 CHARGE ou HAUTE PRESSION (Multizone) + INDICATION DE TEMPS RESTANT sani rinse |
Regeneration: Volume | 300 cm 3 |
Drain pump motor: Voltage | 220/ 240 V |
Spray pump motor: Resistance | Primary winding 79 Ω Start winding 60 Ω |
Detergent capacity: Dosage steps | 1 à 6 cm 3 |
Water pressure: Inlet pressure () | bar |
Coil of dispenser: Frequency | 50/ 60 Hz |
Regeneration: after wash cycles | Depending on the water hardness |
Succession of programs and duration: Intensive | 60°C à 70°C |
Dimensions + Weight: Product dimensions (Weight) | 50 kg |
Flow rates/ Inlet volume: Spray arm upper | ~ 27 l/min |
Motor Diverter Valve: Frequency | 50/ 60 Hz |
Regeneration valve: Resistance | 3,13 k Ω |
Electronic boards: Serial boards () | see on the boards itself |
Flow rates/ Inlet volume: Flow meter | 208 Impuls./l |
Data Energy Label: Reference program | A5h A A A |
Размеры + Вес: Размеры продукта (ширина) | 59,7 cm |
Drain pump motor: Resistance | 146 Ω |
Water softener setting: | POUR CHANGER LA PROGRAMMATION DE DURETE D`EAU PRESSEZ LA TOUCHE «MACHE/ARRET» POUR METTRE EN MARCHE. SELECTIONNER LE PROGRAMME 2 APPUYEZ PENDANT 5 SECONDES SUR LA TOUCHE «DEPART» JUSQU`A CE QUE LE «VOYANT DEPART» CLIGNOTE. LE REGLAGE SE FAIT PAR LE NOMBRE DE CLIGNOTEMENTS OU SUR AFFICHEUR A CRISTAUX LIQUIDES CHAQUE FOIS QUE VOUS APPUYEZ SUR LA TOUCHE «DEPART» LA VALEUR DE LA DURETE D`EAU AUGMENTE. APRES AVOIR ATTEINT LE CHIFFRE 7, LE CYCLE RECOMMENCE A 1. POUR SAUVEGARDER LE REGLAGE ET POUR SORTIR APPUYEZ DE NOUVEAU SUR LA TOUCHE MARCHE/ARRET |
Succession of programs: Programs () | VOIR CHARTE |
Water softener: Resin container quantity | 700 cm 3 |
Succession of programs and duration: Chrono | 40 °C |
Электрические базовые данные: частота | 50 Hz |
Электрические базовые данные: Потребляемая мощность | 2,2 kW |
Coil of dispenser: Voltage | 220/ 240 V |
NTC | 20 °C 58,1 kΩ 25 °C 47,1 kΩ 30 °C 38,2 kΩ 40 °C 25,4 kΩ 50 °C 17,2 kΩ 60 °C 11,8 kΩ 70 °C 8,3 kΩ 80 °C 6 kΩ 85 °C 4 kΩ |
Regeneration: Salt consumption for regeneration | ~ 77 g |
Dimensions + Weight: Wooden door (Height of plinth) | 93 mm |
Электрическая база данных: Предохранитель | 10 A |
Размеры + Вес: Размеры продукта (Глубина) | 55,5 cm |
Dimensions + Weight: Wooden door (Width) | 592 mm - 595 mm |
Regeneration valve: Voltage | 220/ 240 V |
Dimensions + Weight: Wooden door (Weight) | max. 5,5 kg |
Detergent capacity: Main wash | 40 cm 3 |
Succession of programs and duration: Normal | 40°C à 55°C |
Water softener: Regeneration dosage | 300 cm 3 |
Heating element: Resistance | 24,5 Ω |
Succession of programs and duration: Eco | 50°c |
Single electric water inlet valve: Frequency | 50/ 60 Hz |
Dimensions + Weight: Wooden door (Thickness) | 16 mm - 20 mm |
Water Volume: | volume at alternating spray system (same level when selected zone washing as in the normal programs) |
Spray pump motor: Power Consumption | 125 W |
Heating element: Heating speed | ~ 2,0 °C/min |
Rotations: Spray arm lower | 30 tr/min - 40 tr/min |
Regeneration: Water hardness | 0 - 60 (53) 0 - 10,7 mmol/ l 0 - 107 ° fH |
Electronic boards: Serial boards (DLB) | DIFFERE) 489912 |
Flow rates/ Inlet volume: Drain pump | 16 l/min |
Размеры + Вес: Размеры продукта (Высота) | 82,0 cm - 87,0 cm |
Motor Diverter Valve: Resistance | 6,5 k Ω |
Regeneration: Number of cycles with 2 kg salt | ~ 26 |