All programs will be locked after start. Changing the program or ?nishing the program will be possible only after pressing the start button for longer then 1.5 sec. (Break by customer)
A switching off the appliance or unplug the appliance for a while, this will frozen the program step and later on, the program continuos on the same position.
Exception: Switching off the appliance or unplug the appliance during the drying phase, this will lead directly to the end of the program.
Электрические базовые данные: напряжение
220/ 230 V
Heating element: Safety thermostat self reset (Temperature of water)
~ 85 °C
Rotations: Spray pump motor
2800 RPM
Heating element:
1 Element system
Electronic boards: Serial boards (Basic UCB, not programmed)
4619 724 17401
Data Energy Label: Drying Performance
C
Heating element: Power Consumption
1.87/ 2.04 kW
Regeneration on appliances without potentiometer for water hardness: Water hardness
0 - 60 °dh 0 - 10.7 mmol/l 0 - 107 °Fh
Regeneration valve: Frequency
50/ 60 Hz
Rotations: Spray arm upper
30 RPM - 40 RPM
Flow rates/ Inlet volume: Pump height max.
1.1 m
Flow rates/ Inlet volume: Spray arm lower
~ 33 l/min
Regeneration on appliances without potentiometer for water hardness: Volume
300 cm 3
Spray pump motor permant spray system: HI
69 Ω
Water softener: Resin container
900 cm 3
Electronic boards: Serial boards (UB)
4619 724 83861
Heating element: Voltage
220/ 230 V
Flow rates/ Inlet volume: Inlet valve
4 l/min
Accessory:
If you need spare parts apart from
the spare part list have a look
in the Service Bulletin 4812 718 40084.
Water softener: Salt container
2 kg
Electronic boards: Serial boards (CB programmed)
446171
Drain pump motor: Voltage
220/ 240 V
Detergent capacity: Dosage steps
1 ml - 6 ml
Electrical base data: Total power
2.0 kW - 2.2 kW
Coil of dispenser: Frequency
50/ 60 Hz
Dimensions + Weight: Product dimensions (Weight)
53 kg
Double electric water inlet valve: Voltage
220/ 240 V
Flow rates/ Inlet volume: Spray arm upper
~ 27 l/min
Volume: Water Volume Level
Regeneration 0.3 l 15 mm
Back rinse 3x 1.0 l 60 mm
Prewash 4.8 l 120 mm
Main wash 4.2 l 118 mm
Intermediate rinse 1 4.2 l 118 mm
Intermediate rinse 2 4.2 l 118 mm
Clear rinse 4.2 l 118 mm
Safety/ overflow 8.5 l 141 mm
Heating element: Fuse
206 °C
Regeneration valve: Resistance
3.13 k Ω
Electronic boards: Serial boards ()
Programing of version and programmed control board, see "Service" and "Data set" on rating plate of inner door:
Data Energy Label: Energy Performance
B
Flow rates/ Inlet volume: Flow meter
208 lmp/l
Data Energy Label: Reference program
P5b
Размеры + Вес: Размеры продукта (ширина)
59.7 cm
Drain pump motor: Resistance
146 Ω
Flow rates/ Inlet volume: Ceiling rotor
~ 8 l/min
Succession of programs: Programs ()
see program diagram
Электрические базовые данные: частота
50 Hz
Coil of dispenser: Voltage
220/ 240 V
NTC
20 °C 58.1 kΩ
25 °C 47.1 kΩ
30 °C 38.2 kΩ
40 °C 25.4 kΩ
50 °C 17.2 kΩ
60 °C 11.8 kΩ
70 °C 8.3 kΩ
80 °C 6 kΩ
85 °C 4 kΩ
Regeneration: Salt consumption for regeneration
77 g
Электрическая база данных: Предохранитель
10 A
Water pressure: Spray pump pressure
0.3 bar
Размеры + Вес: Размеры продукта (Глубина)
59.6 cm
Double electric water inlet valve: Frequency
50/ 60 Hz
Regeneration valve: Voltage
220/ 240 V
Regeneration on appliances without potentiometer for water hardness: after wash cycles
1
Detergent capacity: Main wash
40 cm 3
Water softener: Regeneration dosage
300 cm 3
Heating element: Resistance
24.5 Ω
Spray pump motor permant spray system: HA
48 Ω
Spray pump motor permant spray system: Power Consumption