Regeneration dosage: Steps to set the water softening system
5
Rotations: Drain pump motor
2500 RPM
Regeneration dosage: Salt container
1.5 kg
Coil of dispenser: Voltage 220/ 240 V (max.)
240 V
Spray pump motor: Voltage
220/ 240 V
Volume: Clear rinse
140 ccm
Heating element: Temperature on surface
~ 115 °C
Volume: Water connection up to
60 °C
Data Energy Label: Reference program (Bio eco)
55°C
Volume: Rinse aid dosage
140 cm 3
Succession of programs: Succession (Bio eco)
55°C
Spray pump motor: HA
~ 54 Ω
Drain pump motor: Power Consumption
38 W
Measuring the level:
Remove the coases sieve, put into the sump a meassuring meter, look the height of the water level
Program information:
All programs will be locked after start. Changing the program or ?nishing the program will be possible only after pressing the start button for longer then 1.5 sec. (Break by customer)
A switching off the appliance or unplug the appliance for a while, this will frozen the program step and later on, the program continuos on the same position.
Exception: Switching off the appliance or unplug the appliance during the drying phase, this will lead directly to the end of the program.
Электрические базовые данные: напряжение
220 V - 230 V
Heating element: Safety thermostat self reset (Temperature of water)
~ 85 °C
Safety level:
(Floater switches of the inlet valve and on the drain pump)
Rotations: Spray pump motor
2850 ± 20RPM
Heating element:
1 Element flow through system
Measuring the level: Working level
110 mm
Single electric water inlet valve: Resistance
3.76 k Ω
Drain pump motor: Frequency
50 Hz
Single electric water inlet valve: Voltage
220/ 240 V
Heating element: Power Consumption
2.05 kW
Heating element: Voltage
220/ 230 V
Regeneration valve: Power Consumption
6 W
Spray pump motor: HI
~ 45 Ω
Spray pump motor: Capacitor
6 µ F
Regeneration dosage: Volume for regeneration
320 cm 3
Drain pump motor: Voltage
220/ 240 V
Electrical base data: Total power
2.2 kW
Measuring the level: Safety/ overflow
125 mm
Volume: Detergent
5+25 gr
Coil of dispenser: Voltage 220/ 240 V (min.)
220 V
Dimensions + Weight: Product dimensions (Weight)
43 kg
Heating element: Fuse
206 °C
Regeneration valve: Resistance
~ 3.75 k Ω
Размеры + Вес: Размеры продукта (ширина)
44.8 cm
Drain pump motor: Resistance
~ 146 Ω
Succession of programs: Programs ()
see program diagram
Электрические базовые данные: частота
50 Hz
NTC
23 °C ~ 14 kΩ
Succession of programs: Succession (Delicate)
45°C
Электрическая база данных: Предохранитель
10 A
Water pressure: Spray pump pressure
~ 0.3 bar
Размеры + Вес: Размеры продукта (Глубина)
57.0 cm
Regeneration dosage: Number of cycles with 1.5 kg salt